|
Client StrongBridge B1 Station 2,4GHz + panel antenna 12dBi
This array allows fold with panel antenna 18dBi and integrated in her Access Point TP-LINK TL-WA500G. Everywhere there he is ideal solution, where they do not check standard solutions. Such array enables building of cordless network notorious 15 minutes.
ARRAY DOESN'T HAVE POE FTP CABLE CONNECTOR - YOU CAN BUY THAT CABLE WITH REQUEST LENGH HERE
FTP cable connector belongs to introduce for center of building and connect to power supply and additional LAN (im lengh in array) cable connect to DSL modem, switch or for computer.
Description of Access Point:
The TL-WA500G 54Mbps Wireless Access Point will allow you to connect your network wirelessly better than ever, easily and securely. With the most attentive wireless security, the TL-WA500G 54Mbps Wireless Access Point provides multiple protection measures. It can be set to turn off wireless network name (SSID) broadcast so that only stations that have the SSID can be connected. The AP provides wireless LAN 64/128/152-bit WEP encryption security, and WPA/WPA2 and WPA-PSK/WPA2-PSK authentication and TKIP/AES encryption security.
Modes of work leans TL-WA500G:
- AP
- AP Client
- Repeater
- Bridge Point-to-Point
- Bridge Point-to-Multipoint
The TL-WA500G 54Mbps Wireless Access Point complies with the IEEE 802.11g/b standards and adopts 2x to 3x eXtended Range™ WLAN transmission technology so that transmission distance is 2-3 times that of traditional 11g/b solutions, up to 855.36m tested in China. Transmission range is extended to 4-9 times. It is compatible with all IEEE 802.11g and IEEE 802.11b products.
Featuring high performance transmission rates, simple installation and adaptability, the TP-LINK Wireless Access Point is the perfect solution for small office and home needs. The AP provides AP/AP Client/WDS modes and complies with IEEE 802.11g and 802.11b standards. The AP provides excellent security features such as WEP and WPA encryption.
Specyfication:
- Standard - 802.11 b/g
- Frequency Range - 2400 - 2483,5 MHz
- Data rate - 54g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
11b: 11, 5.5, 2, 1 Mbps
- Modulation - BPSK, QPSK, CCK, OFDM
- Output power - 17dBm
- LAN ports - 1x10/100BaseT Ethernet RJ45
- Security - 64/128/152bit WEP, WPA, WPA2, PSK, TKIP, AES, 802.1x/Radius
- Additional functions - LAN ACL, serwer DHCP, roaming WLAN
- Power supply - PoE
- Working temperature - -20 ~ 40°C
Description of antenna:
Microstriped antenna can be applicable in subscriber's points in situations of big condensing networks in same working thread. Such solution can be indispensable in situation, when risk of mutual disturbance exists among baseline stations and it is not possible to employ omnidirectional antenna.
Antenna characterized very good conditions on weather immunity (wind, rain, fog, drizzle, snow, frost). Antenna for external employment as well as internal. It can be use in subscriber's points (at clients). Sound offers very and stable signal on average distance. Grapple directly for mast in horizontal polarization or vertical.
Construction is easy and that allows in installed place behavior of big esthetics in installment of antenna not enough observable. Antenna is not tight for constant solid.
Specyfication:
- Gain - real 12dBi
- Polaryzation - [H], [V]
- Half power beamwidth [H] - 35°
- Half power beamwidth [V] - 32°
- VSWR - 1,2
- Impedance - 50Ohm
- Dimensions - 225mm / 207mm / 20mm
- Weight - 0,4kg
- Grapple for mast - 30-60 mm
I send behind collecting most eager. You will pay on Post Office at receipt. Time of supply mail days 2-3 - near. Courier firm DPD you will receive commodity on second day after shopping.
(*) Note! Despite small force AP collated access point can cause outreaching of admissible value 20 dbm e.i.r.p, so such juxtaposition are executable on individual order of entitled client only. Time of realization of order from 1 for 4 days.
|
