|
OUTDOOR array on SparkLAN WX-7800A / Tonze AW-6660 20m PoE
This array allows fold to outdoor instellment. Everywhere there he is ideal solution, where they do not check standard solutions. Such array enables building of cordless network notorious 15 minutes.
Complete supplying in array for 20m PoE cable with power supply. Array belongs to place outside usually on roof.
Manner of array connection to antenna:
20m long cable belongs to introduce for center of building in array be placed on - dividing on power supply and additional LAN cable for DSL modem, switch or for computer. Array doesn't have antenna in kit.
Discription of Access Point:
It includes access of culminating point in prettiest casing that two independent cordless transmitters (just like AW-6660) WX-7800A. One of they takes advantage frequency band 2,4Ghz and two standards serves 802.11b and 802.11g, which properly serve for 11 -mbps and however, second transmitter takes advantage thread for 108 Mbps. Frequency 5Ghz and standard serves exclusively 802.11a, who can work with speed 108 maximum Mbps. As that both radio take advantage waves can cover on other frequencies with success whole area of cover all available standards 802.11 working. In order to safety of network maintain offer 152 bit WX-7800A WEP and it allows these users which admission for network on it filtration address that allow MAC. Configuration and installation of organizing is very simple on browser applying configuration based www.
Most important features of fix-ups:
-
It serves all standards from family 802.11: 802.11a, 802.11g oraz 802.11b
-
Speed of connection for 108Mbps
-
Management about easy configuration through browser based www
-
It allows highly efficient universal cordless connection of network
-
Good solution for transmission exclusively multimedia data requiring high speed connection
-
Fast and easy installation and configuration
-
Available modes of work WDS, AP, Bridge, P2P&P2MP Repeater and APClient
-
ATHEROS XR(TM) eXtended Range Technology
Specyfication:
Interface:
- 10/100Base-T ethernet port
- Ledx4: Power, LAN, 11a Link/Act, 11g link/Act
- Antennas: 802.11a: 2dBi, 802.11b/g: 2dBi
- Click retrieves for factory setups reset AP (after 6sec)
- Adjusted ACK parameter
Characteristic of radio:
- Standard: IEEE 802.11a 802.11b oraz 802.11g dla WLAN
- Frequency Range:
a)802.11a:
-US: UNI-Band 5.15~5.35GHz
-EU: UNI-Band 5.15~5.35GHz
UNI-Band 5.47~5.725GHz
b)802.11b/g:
ISM-Band 2.412~2.4835GHz
- Modulation: CSMA/CA z ACK
- Outdoor power:
a)802.11a: Max 16dBm@16QAM R3/4
b)802.11g: Typ. 16dBm
c)802.11b: Typ. 18dBm
Affection of receiver:
- a)802.11a: 6Mbps 10-5BER@-91dBm; 54Mbps 10-5BER@-72dBm; 108Mbps 10-5BER@-69dBm
- b)802.11g: 11Mbps 10-5BER@-85dBm; 54Mbps 10-5BER@-72dBm; 108Mbps 10-5BER@-69dBm
Speed of transmission:
- a)802.11b: 11Mbps, 5.5Mbps, 2Mbps, 1Mbps
- b)802.11g & 802.11a: 108, 54, 48, 36, 24, 18, 12, 9, 6 Mbps
Software:
- TCP/IP, IPX, NetBEUI protocol
- Management - from WWW
Security:
- a)64/128/152-bit WEP&WPA
- b)802.1x Radius Client
- c)MAC filtering
Modes of work:
- AP, APclient, Repeater, P2P & P2MP Bridge
Power supply:
Certificates:
I send behind collecting most eager. You will pay on Post Office at receipt. Time of supply mail days 2-3 - near. Courier firm DPD you will receive commodity on second day after shopping.
|
