|
Bridge-Client Station StrongBridge V1 5GHz + panel antenna 20dBi
This array allows fold with panel antenna 24dBi and integrated in her RouterBoard RB 411 level3 + miniPCI 5GHz card. Everywhere there he is ideal solution, where they do not check standard solutions. Such array enables building of cordless network notorious 15 minutes.
ARRAY DOESN'T HAVE POE FTP CABLE CONNECTOR - YOU CAN BUY THAT CABLE WITH REQUEST LENGH HERE
FTP cable connector belongs to introduce for center of building and connect to power supply and additional LAN (im lengh in array) cable connect to DSL modem, switch or for computer.
They enter to composition of array with fix-up STRONGBRIGDE V1:
-
Motherboard RB 411 level3
-
miniPCI card for 5GHz
-
Panel antenna 24dBi 5GHz
-
Handle
-
Grapple for mast 50 mm
-
Power supply
-
PoE adapter
Description of RB411 level3:
MikroTik is proud to introduce the next generation CPE device, the RouterBOARD RB411. It uses the same form factor as it's predecessor - the RB133C, but is many times more powerful. In fact, our throughput tests indicate that it can reach up to 3 times more throughput. This is the first of RouterBOARD products to use the new Atheros AR7100 CPU, and will require new RouterOS package files.
Specyfication:
-
Processor - CPU Atheros AR7130 300MHz
-
Memory - 32MB DDR SDRAM
-
Bios - RouterBOOT
-
Storage - 64MB NAND memory
-
LAN harbor - 1x 10/100 Mbit/s Fast Ethernet with Auto-MDI/X
-
Expanios harbors - miniPCI Jeden MiniPCI Typ IIIA/IIIB
-
Clicks remaining - Reset, Beeper
-
RS harbors - 1x DB9 RS232C, 115200bps 8N1
-
LED lamps - Power, NAND activity, 5 user LEDs
-
Power supply - Power over Ethernet or classic nest supplying 10 - 28V, DC (PoE prescribe 18-28V)
-
Dimension - 10.5 cm x 10,5 cm
-
Power input - ~3W without miniPCI cards, maximum 12 W with miniPCI cards
-
OS - MikroTik RouterOS v3, licencja Level 3
-
Working temteratures - -20°C to +70°C
Description of miniPCI cards:
Broadcasting card about new chipset in 802.11a/b/g standards based working on Atheros AR5414. Card works in range of frequency 2.312-2.499 and 4.920-6.100GHz. It is made optimum for work in systems in foothold about protocol MikroTik Nstreme. It enables getting of connection on big distances at behavior of perfect production capacity.
Specyfication:
- Frequensy range - 802.11b/g 2.312 – 2.497 (5 MHz step), 802.11a 4.920 – 6.100 (5 MHz step)
- Chipset - Atheros AR5414
- Security - WEP 64, 128bit, TKIP i AES-CCM, 802.1x WPA authentication
- Modulaction - 802.11b+g DSSS, OFDM dla przepustowości >20Mbps, 802.11a OFDM
- Interface - Mini-PCI Version 1.0 type 3B
- Power supply - 3.3V +/- 10% DC 400mA max (300mA typ.)
- Gain/affection:
- IEEE 802.11a: 17dBm
- IEEE 802.11b: 19dBm
- IEEE 802.11g: 18dBm
- Data rate:
- 802.11b: 11,5.5,2,1 Mbps, auto-fallback
- 802.11g(Normal mode): 54,48,36,24,18,12,9,6 Mbps,auto-fallback
- 802.11g(Turbo mode): 108,96,72,48,36,24,18,12 Mbps, auto-fallback
- 802.11a(Normal mode): 54,48,36,24,18,12,9,6 Mbps, auto-fallback
- 802.11a(Turbo mode): 108,96,72,48,36,24,18,12 Mbps, auto-fallback
- Working temperatures - od -20°C do 50°C
- Antenna connectors- 2x U.fl
In array of card from series miniPCI CM9, RouterBoard R52, depending on availability SparkLAN 123AG, we can install chosen card on wish of client if it is available.
Description of antenna:
Grapple directly for mast, full regulation due to employment of innovative solution. Construction is easy and that allows in installed place behavior of big esthetics in installment of antenna not enough observable, and easiest usage or for grapple of antenna smallest racks. Antenna is closed circulation include on weather discharges due to with whole construction antenna resistant which not causing connect.
Microstriped antenna can be applicable in subscriber's points in situations of big condensing networks in same working thread. Such solution can be indispensable in situation, when risk of mutual disturbance exists among baseline stations and it is not possible to employ omnidirectional antenna.
Specyfication:
- Gain - real 20dBi
- Polaryzation - [H], [V]
- Half power beamwidth [H] - 25°
- Half power beamwidth [V] - 18°
- VSWR - 1,4
- Impedance - 50Ohm
- Dimensions - 250mm / 250mm / 90mm
- Grapple for mast - 30-60 mm
I send behind collecting most eager. You will pay on Post Office at receipt. Time of supply mail days 2-3 - near. Courier firm DPD you will receive commodity on second day after shopping.
(*) Note! Despite small force AP collated access point can cause outreaching of admissible value 20 dbm e.i.r.p, so such juxtaposition are executable on individual order of entitled client only. Time of realization of order from 1 for 4 days.
|
